[ 3 / biz / cgl / ck / diy / fa / ic / jp / lit / sci / vr / vt ] [ index / top / reports ] [ become a patron ] [ status ]
2023-11: Warosu is now out of extended maintenance.

/diy/ - Do It Yourself

Search:


View post   

>> No.2011660 [View]
File: 1.65 MB, 4160x3120, IMG_20190525_161000754.jpg [View same] [iqdb] [saucenao] [google]
2011660

>>2011652
I have a larger printer than most; it's not quite autism to salvage a print when you have a 36-hour/~2kg print that fails 60%of the way through.

>oh shit it stalled for some reason what do
>turn the fucking breaker back on since the vacuum cleaner tripped it again and I forgot that the
>Keep the bed heated so it doesn't come loose
>Measure vertical height to bed
>Find the layer height that matches up with that in the code
>If you can, determine where in the gcode it failed and trim to that position by checking with a g-code viewer
>Home x/y
>manually set Z-position by homing it to the top layer of the model
>modify start of g-code to start fans, not home the z, set extruder position to match up with g-code
>start
>hope you did everything right
You will almost always end up with a noticeable seam but if that's something you can live with it beats wasting a spool of filament plus ~24 hours

>> No.1792770 [View]
File: 1.65 MB, 4160x3120, IMG_20190525_161000754.jpg [View same] [iqdb] [saucenao] [google]
1792770

>>1792747
No I don't think that's me. I'm the one with the folgertech FT-6.

Navigation
View posts[+24][+48][+96]