[ 3 / biz / cgl / ck / diy / fa / ic / jp / lit / sci / vr / vt ] [ index / top / reports ] [ become a patron ] [ status ]
2023-11: Warosu is now out of extended maintenance.

/diy/ - Do It Yourself

View post   
File: 557 KB, 2048x1536, 71b4798e-4c35-4a8d-bcbc-de827fda3011..jpg [View same] [iqdb] [saucenao] [google]
1771015 No.1771015 [Reply] [Original]

cnc router bros where you at?

going to post a few pictures of my router, atc is operational now I'm currently working on the wiring for the sensors and rewriting my macros

>> No.1771021
File: 503 KB, 2048x1536, 0b9ee60b-fc2b-454c-8835-34bb24fdd203..jpg [View same] [iqdb] [saucenao] [google]
1771021

another photo of the tool rack, I recently upgraded to a 150mm stroke piston to give me more clearance for a dust enclosure I plan on building to keep debris away from the tool holder tapers

>> No.1771064

Nice setup. Some day I’m going to make my own as well

>> No.1771178

>>1771021
>the virgin atc
>vs
>the CHAD manual tool change without even endstops

>> No.1771199

>>1771015
Oh my, good job. I am still in the process of heavy thinking about my diy CNC.
Details on the water cooled spindle and atc?

>> No.1771215
File: 794 KB, 1536x2048, f1a76506-ec11-4762-a391-024b310a9bee..jpg [View same] [iqdb] [saucenao] [google]
1771215

the electronics enclosure, decided to use a VGA cable and breakout boards for 4 of the sensors. I'll clean up the wiring but won't put in too much work since I plan on replacing the steppers with servos and eventually swap out the proximity sensors with higher quality units

>> No.1771228
File: 598 KB, 1536x2048, 7541b3cf-a91f-48dd-82cf-e6a6bbcb716a..jpg [View same] [iqdb] [saucenao] [google]
1771228

>>1771199
the spindle is a JGL-80/1.5R-20 by the company Jiangentech. Some polish dude recommended the company on YouTube and so I bought their smaller 1.5kw 80mm diameter spindle, iso20 taper toolholders.

here's a picture of the loop, it seems that there's way too much resistance in the loop for the D5 pump to handle so I'm planning on adding another pump. It's been good enough to keep the spindle cool for as long as an hour cutting so far, but I'd prefer to try to meet the manufacturers specs.